Taurus TIGUAN 2000 Manual Del Usuario página 15

create hazards.
- Do not operate on areas which
contain metal objects such as
nails and/or screws.
- Never vacuum hot or sharp ob-
jects (cigarette butts, ash, nails,
etc.).
- Use the appliance only for dry
working tasks.
- Never leave the appliance
connected and unattended if is
not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any
part of the body of a person or
animal.
Service:
- WARNING: There is a risk of
fire if the appliance is not clea-
ned following these instructions.
- Any misuse or failure to fo-
llow the instructions for use
renders the guarantee and the
manufacturer's liability null and
void.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has been
removed.
- Prepare the appliance according to the function you
wish to use.
Vacuuming function:
- Fit the hose unit to the vacuum cleaner's air intake.
- To disconnect the hose unit from the vacuum cleaner,
press the two buttons on the hose joint at the same time
and pull outwards.
Manual Tiguan 2000.indb 15
Insertion of accessories into the appliance's grip:
- The appliance's grip is designed in such a way that it
allows the insertion of the following accessories: (use
the combination that best meets your requirements)
- Extendable extension tube: Designed to provide access
to surfaces which are out of reach and make floor
cleaning comfortable, its length can be adjusted by using
the adjustment control.
- Lid: Specially designed for cleaning floors (both rugs,
carpets and hard floors), its base has a retractable brush
that can be adjusted to two heights for greater efficiency
on these floors.
- Vacuum cleaner base for delicate floors: Specially
designed for delicate floors, such as parquet wooden
flooring.
- Lance: Specially designed for getting into cracks and
difficult corners.
Use:
- Take the length of cable required out of the housing.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- Select the desired speed.
Electronic power control:
- The power of the appliance can be regulated by using
the power regulator control (G). This function is very
useful, as it makes it possible to adapt the power of the
appliance to the type of work that needs to be done.
Once you have finished using the appliance:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance to the mains.
- Retract the cable by pressing the roller cable button
and guide the cable into the appliance.
- Clean the appliance
Cord housing
- This appliance has a housing for the mains connection
cord located at the rear.
Carry handle/s:
- The device has a handle on the upper part so it can be
transported easily and comfortably.
Parking position:
- This appliance has two parking positions for comforta-
ble and straightforward storage.
- To make use of the vertical parking put the appliance in
a vertical position (so that the back part of the appliance
is now leaning against the floor) secure the hook of the
head to the hook which can be found on the lower part of
the appliance (Fig. 1)
- To use the horizontal parking position, fix the break
pad hook to the hook situated on the rear side of the
appliance (Fig.2)
Safety thermal protector:
- The appliance has a safety device, which protects the
appliance from overheating.
- If the appliance turns itself off and does not switch
23/11/12 12:30