Loading The Batteries; Removing The Batteries - Citizen CHU503 Manual De Instrucciones

LOADING THE BATTERIES

(Batteries supplied with the unit should be loaded in compartment before you use
the blood pressure monitor.)
* When you install the batteries for the first time after purchase, the monitor will
display the clock setting screen. Follow step 2 and subsequent steps in TIME
ADJUSTMENT (
1
Open the cover of battery compartment.
Pressing the hook down, pull the cover toward you to open.
* If the Blood pressure monitor is
left unused for an extended period
of time, the batteries should be
removed from the compartment.
2
Place batteries in the compartment.
Put the batteries paying attention to the positive
and negative terminal symbols
3
Close the battery cover.
Fitting the lugs of the cover at the
mating recesses of the battery
compartment body, push the
hook to close the cover.

REMOVING THE BATTERIES

• When the icon
batteries with four new ones. All four batteries should be changed at once.
: The remaining capacity of the batteries is inadequate.
• Adjust the clock after changing the batteries.
• The data stored in the memory is not deleted by changing the batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR6) and manganese (R6P) batteries together.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than specified.
• When disposing of used batteries, comply with governmental regulations or
environmental public institution's rules that apply in your country/area.
See page 9) to set the clock.
Battery compartment
and
is displayed or nothing appears in the display, replace the old
- Eng 7 -
.
4 "AA" batteries
Battery cover
Hook
Fit the lugs
(projections) at
the recesses.