Quantum DDS-4 Instrucciones De Instalación página 4

Tabletop and Internal Tape Drive Installation
Figure 4 External Drive
Figure 5 Connecting the
Cables — USB/eSata Tape
Drive
Internal Tape Drive
Important Safety
Precautions
4
2 In addition to the contents included with your tabletop tape drive, you need the
following items:
• USB or eSATA cable
3 Connect the USB or eSATA cable to the tape drive and to the USB or eSATA port on
your computer.
USB Tape Drives Only — For optimum performance, the USB tape drive
Note:
should be connected to a USB 2.0 port and be the only device on the root
hub.
4 Register your tape drive at http://www.quantum.com/registration.
Your internal tape drive has very sensitive components that are prone to damage from
0
electrostatic discharge (ESD). Use extreme care when handling the drive, as it can be
damaged by ESD. Before handling the drive, read these ESD instructions to prevent
damage to the drive.
• Wear an ESD-preventive grounding wrist strap or observe similar ESD precautions
when working with the drive. Be sure the wrist strap makes good skin contact. Do not
remove the wrist strap until you finish working with the drive.
Internal Tape Drive