Troubleshooting - GreenWorks Tools 5103507 Manual De Utilización

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
English (original instructions)
PROBLEM POSSIBLE CAUSE
Nut may be loose or rubber seal is cracked or
Liquid leaks.
damaged.
Liquid leaks Lid not screwed on tightly or seal is cracked or
from the lid. damaged.
Tank starts
to collapse;
tank lid
cannot be Vent holes in tank lid have become clogged.
unscrewed
creating
vacuum.
Battery is out of charge, switch is on "off" position
Low or no
pressure. or tip nozzle is stuck.
Tank leaks
at pump Seals are damaged.
connection.
Tank leaks at
The hose clamp is loose.
pump.
Tank leaks at
hose connec- Clamp is loose or damaged.
tion.
Diaphragm is
Diaphragm is damaged.
leaking.

TROUBLESHOOTING

4
SOLUTION
Tighten the nut and/or replace
the seal and lubricate.
Tighten lid. Lubricate the seal,
replace if necessary.
Remove cap and with a small
wire, unclog the holes. Clean the
cap, check the valve. Lubricate
check valve and reinstall.
Charge the battery to full charge,
turn switch to ON position, un-
screw nozzle, and remove debris.
Replace damaged seals
Tighten the hose clamp.
Tighten clamp or replace if
damaged.
Replace diaphragm.