Publicidad
Idiomas disponibles
Idiomas disponibles
6. Maintenance and servicing
(See also BGV D8)
Routinely check for ease of movement and if necessary grease rotating axes with commercial grease.
-
Have regular testing carried out at maximum intervals of one year by an expert from the operators.
-
Have extraordinary testing after accidents or special incidents that may adversely affect the carrying
-
capacity as well as after servicing carried out by an expert of the operators.
Before the visual and function control under certain circumstances prior cleaning of the handling system
-
may be necessary. This applies in particular when full of substances, e.g. dyes or salts, from its previous
use.
The scope of the test in case of visual defects and malfunctions extends to bridges, deformation, incipient
-
cracks, damage, wear and tear, corrosion damage and malfunctions of the handling system.
As evidence that the testing has been carried out the operator must draw up and keep a checklist.
-
In case of visible deformation, obvious damage, major wear and tear of the screws and screw guides the
-
handling system must not be used further.
Fasskipper 115235, 115239
Seite 7 von 12 Seiten
Ausgabe 02/2008
Publicidad
