Dyna-Glo DGPH301BL Manual Del Propietário página 7

ASSEMBLY INSTRUCTIONS
3. Insert the pins of the bottom plate (M) into the
holes of lower supports (J). Press to secure the
pins. Using 4 pcs of screw M5 x 12 (GG), secure
the lower supports (J) and bottom plate (M).
Make sure the control panel (on part I) is facing
the direction opposite the wheel assembly (L).
Insert the pins of the control box assembly(I) to
the holes of lower support. Press to secure the
pins. Use 4 pcs of 3/16" screw (DD) to secure
the lower support (J) and the control box
assembly (I).
Hardware Used
GG
Screw M5 X 12
DD
3/16" Screw
Philips
JJ
screwdriver
4.Assemble block belt.
Fix the block belt (K) to the 2pcs of lower
support (J) behind the control panel,
using 2pcs screw M5x12 (GG).
Hardware Used
GG
Screw M5 X 12
Philips
JJ
screwdriver
3
I
J
DD
x 4
x 4
GG
x 1
4
x 2
J
x 1
K
GG
7
L
M