Tabla de contenido
Publicidad
FDD9 11-06
13/12/06
English
Thank you for purchasing this KRUPS
appliance. Whatever model you have, please
read these instructions carefully and keep
them for future reference.
For your safety, this product conforms to all
applicable standards and regulations (Low
Voltage
Directive,
Compatibility, Food Compliant Materials,
Environment, ...).
Prevention of accidents
at home
For a child, even a slight burn may sometimes
be serious.
As they grow up, teach your children to be
careful around hot appliances in the kitchen.
If you do use your appliance in the company
of children:
• always use it under adult supervision;
• never touch the hot surfaces of the
appliance;
• never leave the appliance unattended
when plugged in or in use.
If an accident occurs, rinse the burn
immediately with cold water and call a doctor
if necessary.
Description (1)
a
"On/off" light (red)
b
"Ready" light (green)
c
Adjustable thermostat
d
Handle release button
e
Handle
f
Removable waffle plates
g
Plate retaining pins
h
Notches for easier handling of plates
i
Spill tray
j
Non-removable cord
14:41
Page 9
Electromagnetic
Handling the plates
Check that the appliance is cold and
unplugged before handling the plates.
• To remove the plates (7):
Open the appliance and hold the handle (e)
with one hand. With the other hand, grasp the
plate (f) at the notches (h), pull it sideways and
disengage it from the retaining pins (g) to
remove it.
• To insert the plates (8):
Insert the plate (f) at an angle into the
retaining pins (g) and press on the opposite
side to secure it correctly in the appliance.
Installation
Place the appliance on a stable, heat resistant
surface: do not use it on a soft surface such as
a table pad.
Do not place the appliance on or near
slippery or hot surfaces. Do not let the cord
hang down over a source of heat (hot plates,
gas cookers, etc.).
Before using the appliance for the first time:
• Put the handle in a horizontal position (2).
• Open the appliance.
• Remove
any
packaging,
accessories from both inside and outside the
appliance.
• Pour a little oil onto the plates. Wipe with a
soft cloth.
Place the spill tray (i) underneath the
appliance (1).
Plugging in and preheating
the appliance
Close the appliance.
Check that your electrical installation is
compatible with the power and voltage
shown underneath the appliance.
Plug the appliance into an earthed socket
only.
If the power supply cord is damaged, it must
be replaced by the manufacturer or its
service agent or a similarly qualified person
in order to avoid a hazard.
stickers
and
9
Publicidad
Tabla de contenido
