7.3 Changing The Wheels; 8 After Use - Invacare Aquatec Ocean Manual De Instrucciones

Shower and Toilet Commode Ocean / Ocean XL
Cleaning in a domestic environment
IMPORTANT Risk of damage
▸ Do not disassemble the brackets for the accessories.
1. Remove any accessories fitted.
2. Pull the footrests out of the guides.
3. Remove the seat plate and the backrest cover.
4. Remove the side parts, see Section 4 „Assembly and installation".
5. Reinsert the clips in the seat frame immediately so that they are not
misplaced.
6. Wash the individual parts using a cloth or brush and commercially
available cleaning agents and disinfectants.
7. Rinse the parts with warm water.
8. Dry the parts with a cloth.
9. Re-assemble the product,
see Section 4 „Assembly and installation".
Cleaning in a hospital environment
CAUTION Risk of burning your skin
Allow the product to cool after cleaning in the autoclave.
1. In addition to cleaning as described above, clean the product at
regular intervals at 85 °C for 3 minutes in the autoclave.
Cleaning the backrest cover (optional)
1. Remove the backrest cover.
2. Wash the cover in a washing machine at max. 60 °C
using a mild detergent.
IMPORTANT Risk of damage
▸ Washing at higher temperatures can cause shrinkage.
▸ Do not dry covers in the tumble dryer.
14
IMPORTANT
Excessive cleaning can damage textile.
▸ We recommend to change the backrest cover every two
years.

7.3 Changing the wheels

WARNING Risk of accident due to incorrectly fitted
wheels.
The wheels must be replaced by a specialist dealer.
8 After use
8.1 Storage
IMPORTANT Risk of damage
▸ Store the product in a dry area at a temperature of bet-
ween 0 °C and 40 °C, air pressure of 860 - 1060 hPa and
humidity of 30 - 75%.
▸ Do not store the product near heat sources.
▸ Keep the product out of direct sunlight.
8.2 Re-use
The product is suitable for repeated use. The number of times it can
be used depends on how often and in which way the product is used.
Before reuse, clean and disinfect the product thoroughly and check the
safety functions, and reset if necessary.
8.3 Disposal
The disposal and recycling of used devices and packaging must comply
with the applicable legal regulations.
Please refer to the manufacturer for details of the proper
and complete disposal.
After use