Nail Selection - Metabo HPT NV 75A5 Instrucciones Y Manual De Seguridad

SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet

NAIL SELECTION

● Be sure to use only the genuine metabo HPT nails for the NV75A5. The use of any other nails can result in
tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Wire-collated coil nails
Sheet-collated coil nails
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
10-11/16" × 13-3/8" × 5-3/16"
(271 mm × 339 mm × 132 mm)
200 – 300 nails (1 coil)
.064 ft
(1.8 ltr/cycle at 6.9 bar)
(1.8 ltr/cycle at 7 kgf/cm
WARNING
Wire-collated coil nails
Min. Max.
.236" .283"
(6 mm) (7.2 mm)
.099"
(2.5 mm)
.131"
(3.3 mm)
5.7 lbs (2.6 kg)
/cycle at 100 psi
3
)
2
3/8 NPT Thread
Sheet-collated coil nails
Min.
.224"
(5.7 mm)
.090"
(2.3 mm)
English
)
2
Max.
.236"
(6 mm)
.099"
(2.5 mm)
9