Nail Selection - Metabo HPT NT 50A5 Instrucciones Y Manual De Seguridad

SPECIFICATIONS
Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption

NAIL SELECTION

● Be sure to use only the genuine metabo HPT nails for the NT50A5. The use of any other nails can result in
tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
18 Gauge brad nails
70 – 120 psi (4.9 – 8.3 bar, 5 – 8.5 kgf/cm
10-15/32" × 9-3/16" × 2-3/8"
(266 mm × 233 mm × 60 mm)
.025 ft
(.73 ltr/cycle at 6.9 bar)
(.73 ltr/cycle at 7 kgf/cm
WARNING
Dimensions of nails
Min.
.075" (1.9 mm)
.039" .049"
(1 mm) (1.25 mm)
NT50A5
2.8 lbs. (1.3 kg)
100 Nails
/cycle at 100 psi
3
)
2
English
)
2
Max.
9