Beaba BaBycook Solo Folleto De Instrucciones página 14

• Plug the BABYCOOK Solo into a 220-240 Volts earthed socket. Check
that the power supply for your device is suited to your electrical installation.
Unwind the power supply lead. Do not use an extension lead. For safety
reasons, if the power supply lead is damaged, have it replaced by Beaba
after-sales service or its certified national representative. Any connecting
errors cancel the guarantee.
• Never operate the BABYCOOK Solo in cooking mode without water in the
reservoir.
• Never open the jug's lid before the end of the cooking cycle. Burn risk.
• Check regularly that the steam outlet hole is not blocked.
• Handle hot parts with great care. Be careful of the steam released
from the jug during cooking.
• Always check the temperature of food before serving.
• If the mixing cover is not used, food may enter into the reservoir. Always
check that the reservoir is empty before starting a new cycle.
• Descale the heating reservoir regularly.
• Use only water or white vinegar (for descaling) in the heating reservoir. Never
put food, salt or any other non-recommended elements in the heating
reservoir.
• Never leave water in the reservoir. Empty any leftover water after each use.
• Unplug the device when you have finished using it, when you are cleaning
it, or when you are handling the blade. Do not unplug by pulling on the lead.
• Do not use your device if it is not working properly or if it is damaged. In
this event, contact Beaba's after-sales service directly or its certified national
representative.
• After extended periods of inactivity, the device switches off automatically.
SPECIFICATIONS
Voltage: 220-240V ~ 50Hz
Power: 400W (130 W motor)
The logo which appears on this product of a crossed out wheelie
bin indicates that the product should not be disposed of in landfill
with normal household waste. In order to avoid damaging the
environment or human life, please separate this product from other
waste in order to ensure that it is recycled in an environmentally
safe manner. For further details on existing collection sites, please
contact the local administrative authorities or the retailer from which
you purchased this product.
TROUBLESHOOTING
Malfunction
Steam cooking or mixing
does not work
The jug leaks
The lid does not close
My fruit and vegetables
are not cooked at the end
of the cycle
It does not heat enough
or the food is not cooked
enough
There is a water leak
under the jug
14
Possible solution
- Check that the jug is locked on the base and
that the lid is positioned properly on the jug
- Connect the Babycook to a 220V electricity
supply
- Check that the power cable is connected
properly beneath the base of the device
- Check that the lid's seal is inserted properly
(refer to the paragraph on inserting the lid's seal)
- Check that the lid is locked correctly to the
locking arm
- Check that the basket is positioned correctly
in the jug
Fill the jug again with water up to level 1, 2 or 3
according to the programme chosen and pour
the water into the reservoir
Descale the Babycook's reservoir only with
water and white vinegar (refer to the Descaling
paragraph on page 12 )
- Check that the seal is mounted correctly on
the blade (refer to the Maintenance paragraph
on page 12)
- Check the condition of the blade's seal and
replace it if necessary