INSTRUCTIoNS oN ASSEmBLY AND USE
EN
CoNGRATULATIoNS oN PURCHASING YoUR PRoDUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
giving the product to a third party. This product must be assembled by an adult.
This product is not designed for industrial use. The use of the product requires
certain capabilities and skills. Always adjust according to the age of the user and
use for the purpose it has been designed for.
TECHNICAL SPECIFICATIoNS
Item:
Stadion football goal
Item number:
76909
Dimensions when assembled: 300 x 160 x 90 cm
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/service/.
CoNTENTS
16 Goalposts
1 Goal net
7 Tent pegs (for stand fixing)
1 Screw set
1 Manual
Other items included are meant to facilitate safe transportation and are not re-
quired for the installation and use of the product.
SAFETY INSTRUCTIoNS
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connection for stability and fit. Any sharp edges that might have formed must
immediately be removed!
• Warning: do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the
instruction manual.
• Keep young children away while assembling to prevent any risk of strangula-
tion from long cords! For this reason, cut off cord ends to a maximum of 5 cm
after the assembly.
ASSEmBLY INSTRUCTIoNS
Notice: Lubricate the connection assemblies on the narrow ends a bit before
starting the assembly. That facilitates the assembly and extends the durability
of the product!
1. Assembling the goalpost frame and net
First assemble all the round pipes (5-10) as shown in Illus. 1. Make sure that you
use the right numbered pipes. Now screw in the left and right posts (3 and 4)
together and pull the straps of the goal net over them. Tighten the four-cornered
rods 1 and 2 together and push them through the other goal net straps. While
doing so, it is important that the net has already been pulled back over the posi-
tioned rods 5a/5b and 6. The net should be towards the outer side before faste-
ning the door batten. Finally, fasten the batten, post and the remaining goalpost
together. (See Illus. 2)
All images are examples of the design.
2. Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain that the
ground is suitable for the application of pegs (e.g. no water pipes for sprinkler
devices!). Make sure that the pegs are completely driven into the ground and
have firm position. Avoid protruding fastenings (risk of stumbling). On too hard
grounds the goal must be saved by appropriate measures in another way against
overturning in order to prevent risk of injuries (e.g. with slabs or sandbags). Never
play with an unsecured goal or never leave the goal unsecured respectively.
USAGE INSTRUCTIoNS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it
in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together
the metal parts could lead to the protective layer being scratched and rust
developing.
mAINTENANCE AND SToRAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
DISPoSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/service/.
4/8