Reversing The Doors; Tools Needed - Kenmore 795.7940 Serie Manual De Uso

REVERSING THE DOORS

WARNING
ELECTRICAL SHOCK HAZARD
power at the circuit breaker or fuse box. Failure to do so
could result in death or serious injury.
CAUTION
Remove food and any Adjustable Shelves or Door Bins from
doors. Failure to do so could result in serious injury.

TOOLS NEEDED

• 10mm or 13 / 32 inch socket wrench (with 2-inch
extension for bottom door hinge)
• No. 2 Phillips head screwdriver
• 1/4 inch socket wrench
• Flat-head screwdriver for prying
• Adjustable wrench
• 3/32 - inch hex wrench
REVERSING THE FREEZER DOOR
Remove the two screws located on the bottom part of the
freezer handle with a screwdriver.
Handle
Screws
Loosen the upper set screw with a 3 / 32 " hex wrench and
remove the handle. The freezer handle is going to be the
refrigerator handle when reversing the doors.
NOTE: Grasp the handle tightly so that it does not fall
when the screws are removed.
Screw
Wrench
Handle
REFRIGERATOR INSTALLATION
Loosen the handle mounting fastener with a ¼" hex
wrench.
Unscrew the plug button with your
counterclockwise.
Plug
button
Install the plug button on the left side and the handle
mounting fastener on the right side.
Plug
button
Gently pry the top hinge cover with a
screwdriver and remove.
13
Fastener
by rotating it
Mounting
fastener
head