Kenmore 795.7940 Serie Manual De Uso página 18

REFRIGERATOR INSTALLATION
Install the refrigerator handle by adjusting the handle
footprints to fit the mounting fasteners. Tighten the set
screws with a 3/32" hex wrench.
Install the Hinge Hole Pug and the two screws on the top
of the handle with a screwdriver.
Screws
Screw
Wrench
Handle
Hinge Hole
Plug
Handle
18
After switching the doors, make sure that the corners
of the Door Gaskets are not folded over. To ensure a
good seal, apply a small amount of silicon grease on the
corners of gaskets.
Corners