eXterNal cleaNiNG
removable parts (the dose tank, basin and reservoir) may be rinsed easily with
water. We absolutely do not not recommend using a dishwasher. The machine
may be cleaned with water using a soft, non-abrasive sponge or damp cloth.
Do not use cleaning products or methods which are aggressive or solvent-
based, or special cleaning cloths.
clean the coffee spout regularly using a damp cloth. regularly maintaining
your machine is essential for it to last, and for the quality of your espressos.
iNForMatioN For use
This machine is designed for the 1,2,3 Spresso
doses.
A
The arrow flashes white:
1 – Dose tank full:
check the dose tank. if it is full, empty it.
2 – The percolator cover is open/wrongly positioned:
return it to the correct position.
3 – Dose stuck in the percolator.
Open the cover and remove the dose if there is one.
close the cover again.
if you use it without a dose, some of the hot water
will flow into the dose tank. consider emptying it
when you first use it without a dose.
B
The arrow flashes blue:
The reservoir is empty:
check the reservoir . if the reservoir is empty , fill it again and press the button for the
desired cup of coffee to continue. The machine is now ready for use.
If the problem persists, contact the after-sales service
cHaNGiNG tHe ButtoN ProGraMMiNG
Open the dose packaging. put the dose into the appropriate place. press and hold
your chosen button for 5 seconds: short cup, long cup. The arrow and the button to
be set will start to flash. press the button to be set: the coffee cycle will begin. When
the desired amount of coffee is reached, press the button concerned again: the new
amount will be memorized by your machine. repeat the same operation to set the
second button.
The maximum programmable amount is 14 cl.
system. It only accepts 1,2,3Spresso
®
25
®