Metra 99-7612 Instrucciones De Instalación página 4

ISO DIN radio provision
with pocket (continued)
5. Mount the Unified Amp Meter to
the radio/bracket assembly using
(2) supplied 3/8" Phillips screws.
(Figure D)
6. Plug the factory harness removed
in disassembly into the 99-7612.
7. Mount the whole radio/pocket/
meter assembly to the radio trim
panel using (4) supplied 3/8"
Phillips screws. (Figure E)
8. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
9. Follow the wiring instructions in
this manual and reassemble dash
in reverse order of disassembly.
Kit Assembly
(Figure D)
(Figure E)
99-7612
DDIN radio provision
1. Trim the shaded areas from the
factory radio trim panel. (Figure A)
Do not cut the locator and screw
hole off as they will be necessary
to mount the 99-7612 radio
housing. (See detail)
2. Attach the 99-7612 radio housing
to the radio trim panel using (4)
supplied 3/8" Phillips screws.
(Figure B)
Trim shaded areas
(Figure A)
Detail
4
3. Slide the Double DIN aftermarket
radio into the radio housing
brackets and secure with screws
supplied with the radio. (Figure C)
Continued on next page
(Figure B)
(Figure C)