Publicidad
Idiomas disponibles
Idiomas disponibles
Never carry the device with the finger on the
■
trigger. If the attachment sleeve is pressed
inadvertently, a pin can be fired and cause
serious injuries.
Interrupt your work if you do not feel comfort-
■
able.
Cartridge strips may not be removed by mere
■
force.
Always discharge the device before you take
■
a break, at the end of the working day, before
trouble shooting and maintenance works and
before changing wear and tear parts.
Symbols in this instruction
manual
Danger
For an immediate threat of danger
which causes serious injuries or death.
Warning
For a possibly dangerous situation
which may cause serious injuries or
death.
Caution
For a possibly dangerous situation which may cause
minor injuries or damage to property.
Proper use
This device is intended to be used for firing pins into
concrete, full block calcium silicate, full bricks and
steel using the original Würth system parts.
Any other use than that described shall be deemed
to be improper use.
The user is liable for damages due to improper
use.
Safety instructions
Warn others of detonation sounds in the vi-
■
cinity of the mounting base which occur when
working with the device.
Unexploded ordnance, or cartridges which
■
are no longer required but operational must
be collected and brought to the stipulated
collecting point.
Use only genuine Würth accessories and
■
spare parts.
Overview (fig. I)
1 Piston
2 Union nut
3 Attachment sleeve
4 Buffer
5 Pin guide
6 Piston buffer
7 Brake ring
8 Piston return spring
9 Retaining ring
10 Actuator
11 Inspection sticker
12 Type plate with serial number
Device elements
15
Publicidad
