Publicidad
Idiomas disponibles
Idiomas disponibles
Technical data
Powder-actuated
tool
Prod. no.
Length of the device
Weight
Pin guide
Performance
Disc cartridge
Recommended max.
firing sequence
Noise / vibration
Measuring values determined in accordance with
EN 15895, EN ISO 3745 and EN ISO 11201.
A-weighted emission sound pressure level on the
■
workplace: L
pA, 1s
C-weighted emission peak sound pressure level
■
on the workplace: L
A-weighted sound power level:
■
L
= 107 ± 2 dB(A)
WA, 1s
The weighted square mean value of the hand-arm
acceleration in frequency does not exceed 2.5 m/s².
Permissible disc cartridges
Only use original Würth cartridges which are admis-
sible for this device.
Cartridge power
weak
medium
very powerful
The device is equipped with a fully automatic power
control. This ensures that the fastener is driven in to
its optimum depth. Use, however, always the suitable
cartridge power to avoid overloading of the device.
16
Diva
1 Premium
®
0864 500
440 mm
3.2 kg
Ø 9 mm
for fastenings of medium
strength
Calibre 6.8/11 mm
in strips of 12
700/h
= 104 ± 2 dB(A)
= 136 ± 2 dB(A)
pC, peak
Colour
Prod. no.
0864 32
green
0864 42
yellow
0864 52
red
Example
Cartridge power
green/yellow
yellow
yellow
The cartridge power data stated here are based
on experience and may vary depending on the
quality of the surface.
Surface and distances
Perform a test shot to determine the cartridge
power to be selected for this surface. Start with the
weakest cartridge (green). In case of surfaces with
extreme tensile strength/density, contact your Würth
customer service.
Minimum strength of the surface
Test the strength of the surface. The minimum pen-
etration depth of the driving pin and the minimum
strength of the surface must be maintained. This
ensures secure hold of the fastening connection.
Surface
Penetration
depths
Concrete
minimum 25 mm
Calcium
approx. 32 mm 100 mm
silicate
Steel
5 mm and
exceeding
Full brick
approx. 32 mm 100 mm
Surface
full block calcium silicate
Concrete C20/25-30/37
(B25-B40)
Steel S 235 J (St37)
Minimum
strength
100 mm
5 mm and
exceeding
Publicidad
