Symbol Description; Risk Of Electric Shock; Electrical Connections - GE Baker Hughes PACE CM Instrucciones De Seguridad Y Guía Del Usuario

Symbols
Symbol Description
This equipment meets the requirements of all relevant European safety directives. The
equipment carries the CE mark.
This symbol, on the equipment, indicates that the user should read the user manual.
This symbol, on the instrument, indicates that the user should refer to the user manual.
This symbol, in this manual, indicates a hazardous operation.
Ce symbole, sur l'instrument, indique que l'utilisateur doit consulter le manuel
d'utilisation. Ce symbole, dans le manuel, indique une situation dangereuse.
This symbol warns the user of the danger of electric shock.
Ce symbole alerte l'utilisateur sur le danger de choc électrique.
Do not dispose of this product as household waste. Use an approved organization that
collects and/or recycles waste electrical and electronic equipment. For more information,
contact one of these:
- Our customer service department: www.gemeasurement.com
- Your local government office.
WARNING
pressure lines before disconnecting or connecting the pressure lines.
Proceed with care.
Only use equipment with the correct pressure rating.
Before applying pressure, examine all fittings and equipment for damage.
Replace all damaged fittings and equipment. Do not use any damaged
fittings and equipment.
Do not exceed the maximum working pressure of the instrument.
This equipment is not rated for oxygen use.

RISK OF ELECTRIC SHOCK

connected to the ac supply protective safety ground.
Isolate the power supply before making any electrical connections to the
rear panel.

Electrical Connections

WARNING
the pneumatic control module in the PACE instrument.
2 | PACE CM Safety Instructions and User Guide-English
Turn off the source pressure(s) and carefully vent the
Isolate the PACE instrument power supply before installing
The ground lead of the instrument must be
© 2008 Baker Hughes, a GE company – All rights reserved.