Publicidad
Idiomas disponibles
Idiomas disponibles
1. Quick Start Guide
WARNING
not connect more than 30V CAT I between the terminals or between the
terminals and the ground (earth). Any connection must be compliant with
the terminal input/output parameters.
External circuits should have appropriate insulation to the mains.
This instrument uses a Lithium-ion (Li-ion) battery pack. To prevent an
explosion or fire, do not short circuit, do not disassemble, and keep it safe
from damage.
To prevent an explosion or fire, use only the GE specified battery
(Part: DPI620G-IS-BATTERY), power supply (Part: 113M0561-2) and battery
charger (Part: IO620G-IS-CHARGER).
To prevent battery leakage or heat generation, only use the battery
charger and power supply in the temperature range 0 to 45°C (32 to 104°F).
The power supply input range is 100 – 240Vac, 50 to 60Hz, 300mA,
installation category CAT II.
Position the power supply so as not to obstruct the supply disconnecting
device.
To prevent a dangerous release of pressure, make sure that all the related
pipes, hoses and equipment have the correct pressure rating, are safe to
use and are correctly attached.
1.1 Overview
The Druck DPI 620G-IS is a battery-powered instrument for electrical measure and source
operations or HART®, Foundation Fieldbus and Profibus digital communications. The Druck
DPI 620G-IS also supplies the power and user interface functions for all optional items. The
touch-screen can display up to 5 different parameters simultaneously.
1.2 Equipment in the Box
The following items are supplied with the Druck DPI 620G-IS:
• Mains adapter for battery charger.
• Battery Charger Cradle.
• Li-ion battery.
• Set of six test leads.
• Safety and Quick Start Guide.
• Stylus
© 2016 Baker Hughes, a GE company – All rights reserved.
To prevent electrical shocks or damage to the instrument, do
DPI 620G-IS Safety and Quick Start Guide-English | 1
Overview
Publicidad
