GE JP256 Serie Manual Del Propietário página 11

Our testing shows that if
you are cooking high sugar
mixtures such as jelly or
fudge and have a spillover,
it can cause permanent
damage to the glass
surface unless the spillover
is immediately removed.
Metal Marks and Scratches
Be careful not to slide pots and pans across
your cooktop. It will leave metal markings
on the cooktop surface.
These marks are removable using the
CERAMA BRYTE Ceramic Cooktop Cleaner
®
with the CERAMA BRYTE
Ceramic Cooktops.
Damage from Sugary Spills and Melted Plastic
Turn off all surface elements. Remove hot
pans.
Wearing an oven mitt:
a. Use a single-edge razor blade scraper
(CERAMA BRYTE Ceramic Cooktop
®
Scraper) to move the spill to a cool area
on the cooktop.
b. Remove the spill with paper towels.
To Order Parts
To order CERAMA BRYTE Ceramic Cooktop
®
Cleaner and the cooktop scraper, please call our
toll-free number:
National Parts Center
CERAMA BRYTE Ceramic
®
Cooktop Cleaner . . . . . . . . . . .
CERAMA BRYTE Ceramic
®
Cooktop Scraper . . . . . . . . . . . .
Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Kit includes cream and cooktop scraper)
CERAMA BRYTE Cleaning Pads for Ceramic
®
Cooktops . . . . . . . . . . . . . . . . . . .
Cleaning Pad for
®
WARNING: Carefully check the bottom of pans for
roughness that would scratch the cooktop.
.
NOTE: If pitting or indentation in the glass surface
has already occurred, the cooktop glass will
have to be replaced. In this case, service will be
necessary.
800.626.2002
GEAppliances.com
If pots with a thin overlay of aluminum or
copper are allowed to boil dry, the overlay
may leave black discoloration on the
cooktop.
This should be removed immediately before
heating again or the discoloration may be
permanent.
Any remaining spillover should be left until
the surface of the cooktop has cooled.
Don't use the surface elements again until
all of the residue has been completely
removed.
11