GE JP256 Serie Manual Del Propietário página 19

When making the wire connections, use the
A
entire length of conduit provided. The conduit
must not be shortened.
With the cooktop in place, open the front of
B
the cabinet door.
Insert the wires from the conduit through the
C
opening of the junction box.
Red
Ground
D Connect the red and black leads from the
cooktop conduit to the corresponding leads
in the junction box.
Ground wire
location
Installation Instructions
Strain Relief Clamp
Black
Red
Black
Once the connections are made, secure wires
E
together using wire nuts.
Ground
GROUNDING INSTRUCTIONS:
The bare ground wire in the conduit is connected
to the cooktop frame. Effective January 1, 1996,
the National Electrical Code will not permit
grounding through neutral. If used in new
construction after January 1, 1996 or in a mobile
home, recreational vehicle or if local codes do
not permit grounding through the neutral white
lead, attach the appliance grounding lead (green
or copper) to the residence grounding conductor
(green or bare copper) in accordance with local
codes. When connecting to a 3 conductor branch
circuit, if local codes permit, connect the bare
ground connector lead of the cooktop to the
branch circuit neutral (gray or white in color).
IMPORTANT:
installed into a blind counter (one with no
cabinet opening below), wire connections must
be made before putting the cooktop into the
cutout opening.
Red
Strain Relief Clamp
Black
If the cooktop is being
19