Equipment | Functions
1. Pillow
1
2. Bluetooth Speaker
2
3. Backrest Cushion
3
4. Quick access remote
5. Seat cushion
4
6. Shoulder Massage
7. Braintronics
logo LED
®
5
8. Armrest
9. Remote Control
10. Side Panel
11. Footrest
2 Airbags
12 Airbags
6 Airbags
20
Preparation for use
6
7
8
9
10
11
Warning!
Do not put the power cord under the chair! Beware of damaging the power cord!
Warning!
Before moving the chair, adjust the footrest back to its original position.
•
Do not move the chair when occupied or in use.
•
Moving the chair may cause damage to the floor. Floor protection is recommended (e.g. rugs or
•
carpet).
Do not drop or suddenly let go of the chair when moving as it may damage the chair.
•
Two persons are recommended when moving the chair and extra care is required.
•
1. Place the chair in an open area
Allow sufficient space around the chair for reclining purpo-
•
ses.
To avoid damage to the floor and to reduce noise, please
•
put a rug under the chair.
Make sure that there is no barrier at the front and the back
•
of the chair.
Please do not put the chair on wet or uneven floor.
•
To avoid signal interference, please place the chair 1 meter
•
away from TV and radio.
Do not expose the chair to direct sunlight or a hightempera-
•
ture place. Otherwise its leather may fade or harden.
2. Move the chair
As illustrated, push the backrest downwards and tilt chair on
•
to its wheels at a 45° angle.
Slowly push and move the chair to the desired location.
•
Lower the chair slowly and smoothly until it is fully flat on the
•
ground.
21