Example: Programming An Email Alert To Be Sent When Movement Is Detected - Avidsen IPC383-Mx Manual De Instrucciones

D - CONFIGURATION
Changing the password to log in to the
1
camera ("admin", by default)
Activation/deactivation and sensitivity of the
2
movement detector
Actions to take if movement is detected:
3
notification, send an email.
Not used on this model
4
Not used on this model
5
10
EN
iOS
1
2
3
4
5
6
7
8
9
10
11
12
13
MOTORISED 960P WIFI IP OUTDOOR
CAMERA
Video quality settings and number of frames
per second.
Warning: if you set the video quality too
high with respect to the quality of the internet
connection of your camera and smartphone
or tablet, you may experience choppy video
or loss of connection.
Two streams can
6
correspond to the maximum resolution
= "résolution Max", and low resolution =
"résolution faible", which you can select from
the live video display.
Warning: in some cases, a change in
camera resolution will only take effect when
the app is restarted. Exit and re-launch the
Aviwatch app if there is a problem.
Configure the camera's current WiFi settings
7
Not used on this model
8
Setting the date and time stamps on the
9
camera's video
Settings for sending emails in the event of an
10
alert (see the example below)
Settings for saving to an FTP server
11
Restarting the camera remotely/Update/
12
Reset
Camera network information
13
2.2 - Example: programming an email alert to be
sent when movement is detected
To program an alert to be sent when movement
is detected, you need 2 email addresses: the
address of the sender which will be used by
the camera, and the address which will receive
the alerts. The camera uses the username and
password of the sender address to connect and
send the email. Configuration depends on the
chosen email provider's settings.
Note: the 2 email addresses can be the same
(you will simply be sending an email to yourself).
In our example, we use
www.gmail.com:
sender-address@gmail.com sends the alerts,
recipient@gmail.com
Both addresses need to have been created
beforehand.
First, go to "Réglages Email" (Email settings):
be adjusted: they
receives the alerts.