Before You Begin - Kohler K-2974 Guia De Instalacion

Tools
Adjustable
Hacksaw or
Wrench
Tubing Cutter
Solder
Sealant Tape

Before You Begin

CAUTION: Risk of product damage. Do not apply direct
heat to the valve body. Excessive heat will damage the rubber
valve seals and plaster guard. If desired, carefully remove the
internal valve components before soldering. Reassemble and
securely tighten the internal valve components.
NOTICE: Do not force the handle in any direction. Forcing the
handle will damage the valve.
Observe all local plumbing and building codes.
Shut off the main water supply.
Carefully plan the installation before beginning. Carefully read
the entire instructions. Component location, spacing, and
situational requirements can vary.
Do not discard the plaster guard from the valve until instructed
to do so.
1145570-2-A
Plus:
• 1/2"or 3/4" nominal
copper tubing & fittings.
Propane
Torch
2 Kohler Co.