For Your Safety In Using The Cd7200 Mk Ii - Fujitsu ECLIPSE CD7200 mkII Manual De Instrucciones

Tabla de contenido

Publicidad

Caution
installation is recommended. Consult with your dealer or a professional installer.
Incorrect wiring may damage the main unit or interfere with safe vehicle operation.
Do not install the main unit in places where it may get dew condensation on (around
the air conditioning hose, etc.), come in contact with water, or in condition of high
moisture, dust or oily smoke. If water, moisture, dust or oily smoke enters this main
Avoid installing in places where it cannot be fastened securely or where there are
come loose due to vibration while driving, causing problems for driving and resulting
Do not install in places with direct sunlight or where it will be hit directly by hot air
from the heater. This may increase the temperature of the interior of this main unit,
Do not block the fan, heat sink or vents of this main unit. When fan, heat sink or
accidents may result.
When installing in vehicles equipped with air bags, check the manufacturer's
cautions regarding operation before operating. Airbags may not operate properly.
Carry out the wiring such that cords are not pinched by movable parts such as seat
from disconnection and electrical shorts.
Carry out the wiring such that the cord does not make contact with metal parts. The
Avoid hot surfaces when wiring main unit. High temperatures may damage wiring,
When changing the installation location for this main unit, please consult the dealer
installation.
Keep volume to a reasonable level so that you can hear sounds from outside the
vehicle, including warning sounds, voices, and sirens. Failure to do so may cause
an accident.
closing display. Injuries may result.
Caution
Injuries may result.
Do not touch the heat dissipating part of the amp. Burns may result from the heat of
this part.
Do not recharge dry batteries. Dry batteries may rupture, resulting in injuries.
batteries. Injuries or pollution to the surroundings may result from battery ruptures
and leakage.
When inserting batteries into the main unit, be careful with the polarity (positive/
negative), and insert them as indicated. If the battery polarities are incorrect, injuries
and pollution to the surroundings may result from battery ruptures and leakage.
Replace used batteries as soon as possible; they may leak and damage main unit.
Battery leakage can burn your skin or your eyes. Wash hands after handling.
If alkaline solution from alkaline dry batteries makes contact with your skin or
clean with water and then seek medical attention.
negative terminals, and after they are insulated, dispose of them according to the
coming contact with other electrically conductive objects such as metal parts, etc.
and injuries may result from battery rupture and leakage.
and high moisture levels. The case may change shape, and the batteries may
rupture and leak.
Be careful of the position of the volume when turning the power source ON. Hearing
damage may result if very loud noise is emitted when the power is turned ON.
Do not operate under abnormal conditions such as when the sound is broken or
distorted. Fires may result.
This main unit uses invisible laser light. Do not disassemble or alter this main unit. If
trouble occurs, contact the dealer where you bought the main unit.
If the main unit is dropped or the cosmetics appear broken, turn off the power to
result.

For your safety in using the CD7200 mk II

Precautions
Précautions
Precauciones
Names and Function
Noms des commandes et des pièces
Nombres de los controles y las piezas
Basic Operation
Fonctionnement de base
Funcionamiento básico
Other Operation
Autre sorte de commande
Otras operaciones
Caractéristiques techniques
39

Publicidad

Tabla de contenido
loading

Productos relacionados para Fujitsu ECLIPSE CD7200 mkII

Tabla de contenido