Blowing Feature - RIDGID RV24000 Manual Del Usuario

Operation (cont.)

Blowing Feature

Your Vac features a Blowing Port.
It can blow sawdust and other debris.
Follow the steps below to use your Vac
as a Blower.
1. Locate Blowing Port of your Vac.
2. Insert the Locking End of the
Professional Locking Hose into the
Vac Blowing Port. The Professional
Locking Hose should snap into place.
To remove the Professional Locking
Hose from the Vac, press the Release
Button in the Hose Assembly and pull
the Hose out of the Vac Blowing Port.
3. (Optional) Attach Extension Wand to
opposite end of Professional Locking
Hose.
4. Turn Vac on and you are ready to use
your Vac as a Blower.
WARNING:
!
Always wear safety eyewear
complying with ANSI Z87.1 (or in
Canada, CSA Z94.3) before using as
a blower.
WARNING:
!
To reduce the risk of injury to
bystanders, keep them clear of
blowing debris.
! CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
!
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
SP6729-5 RIDGID ESF 111418.indb 15
15
Professional
Locking Hose
Blowing
Port
12/3/18 11:18 PM