Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Production code
No-load speed
Max bar length
Usable cutting length
Battery voltage
Weight according EPTA-Procedure 01/2014 (with 6.0 Ah battery pack)
Weight (without battery pack)
Noise/vibration information
Measured values determined according to EN 60745-2-13.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K= 2.5 dB)
Sound power level (Uncertainty K= 2.5 dB)
Always wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 60745-2-13.
Vibration emission value a
h
Rear handle
Front handle
Uncertainty K
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may signifi cantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
CHAINSAW SAFETY WARNINGS
Keep all parts of the body away from the saw chain when
operating the product. Before you start the chainsaw, make
sure the saw chain is not contacting anything. A moment of
inattention while operating chainsaws may cause entanglement of
your clothing or body with the saw chain.
Always hold the chainsaw with your right hand on the rear
handle and your left hand on the front handle. Holding the
chainsaw with a reversed hand confi guration increases the risk of
personal injury and should never be done.
Hold the product by the insulated gripping surface only,
because the saw chain may contact hidden wiring. Saw chains
contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Wear safety glasses and hearing protection. Further protective
equipment for head, hands, legs and feet is recommended.
Adequate protective clothing will reduce personal injury by fl ying
debris or accidental contact with the saw chain.
CORDLESS CHAINSAW
Do not operate a chainsaw in a tree. Operation of a chainsaw
while up in a tree may result in personal injury.
Always keep proper footing and operate the chainsaw only
when standing on fi xed, secure and level surface. Slippery or
unstable surfaces such as ladders may cause a loss of balance or
control of the chainsaw.
When cutting a limb that is under tension be alert for spring
back. When the tension in the wood fi bres is released the spring
loaded limb may strike the operator and/or throw the chainsaw out
of control.
Use extreme caution when cutting brush and saplings. The
slender material may catch the saw chain and be whipped toward
you or pull you off balance.
Carry the chainsaw by the front handle with the chainsaw
switched off and away from your body. When transporting
or storing the chainsaw always fi t the guide bar cover. Proper
handling of the chainsaw will reduce the likelihood of accidental
contact with the moving saw chain.
Follow instructions for lubricating, chain tensioning and
changing accessories. Improperly tensioned or lubricated chain
may either break or increase the chance for kickback.
Keep handles dry, clean, and free from oil and grease. Greasy,
oily handles are slippery causing loss of control.
25
ACS18B30
4604 70 01
000001-999999
10 m/s
300 mm (12")
250 mm
4.05 kg
3.3 kg
85.3 dB(A)
96.3 dB(A)
9.5 m/s
6.1 m/s
1.5 m/s
25
ENGLISH
18 V
2
2
2
Publicidad
