Installation Rules - Vimar TAB 7S Guía Rápida

TAB: 40607
• Home: user's video entryphones.
• Favourites: contacts selected by the user for fast access from the Favourites menu.
• Users: other system users.
• Speech Units: accessible speech units in the system.
• CCTV: CCTV cameras configured to be accessible from the video entryphone.
• Receptions: reception switchboard stations that can be contacted from the video entryphone.
• Implementations: implementations installed in the system that the user can access; they permit implementing functions
such as, for instance, opening locks and switching on service lights.
g) Messages – List of sent and received text messages.
h) Video Messages – List of audio and audio-video messages collected by the video voicemail service.
i) Favourites menu – Access to contacts selected by the user: depending on the type of contact you can, for example, initiate
a call or a self-start, activate an actuation or view images captured by a CCTV camera.
l) Quick settings menu – Access to the main settings: ringtone volume, display brightness, video voicemail service on/off.
m) Status – Displays and allows you to set the user status, i.e. all devices, video entryphones and mobile devices that belong
to the same user: Online or Do Not Disturb. This status is applied to all devices and can be set using any device. In Do
Not Disturb status, all incoming calls are rejected; if the video voicemail service is enabled, the caller is asked to leave
an audio or audio/video message. In Online status, incoming calls are indicated by a ringtone and visual feedback on the
display.
For more information on screens, buttons, call functions, settings, and the contacts list, please refer to the User's Manual that
you can download from the website www.vimar.com

Installation rules

Installation should be carried out observing current installation regulations for electrical systems in the Country where the
products are installed.
Conformity
RED directive
Standards EN 301 489-17, EN 300 328, EN 62311, EN 60065, EN 60118-4.
Vimar S.p.A. declares that the radio equipment type reference 40607 is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet address: www.vimar.com
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included
with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or
return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any
new purchase obligation) to retailers with a sales area of at least 400m
waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the po-
tential negative effects on the environment and people's health, and encourages the re-use and/or recycling of the construction
materials.
, if they measure less than 25cm. An efficient sorted
2
EN
13