SOUNDMASTER RCD1180 Manual Del Usuario página 8

1. Insert the headphone cable (requires 3.5mm stereo plug, not supplied) into the headphone
jack on the unit.
2. Tune the desired volume level on the main unit.
1. Set the FUNCTION switch to FM position.
2. Rotate the TUNING control to tune to your desired radio station.
3. Adjust the sound level by rotating the VOLUME control.
4. To turn off the radio, set the FUNCTION switch to OFF position.
For best reception, fully extend the FM Antenna to receive FM stations.
1. Set the FUNCTION switch to the CD position.
2. Insert the CD disc in the CD compartment and close the CD door, the unit will start reading
the disc, the LCD display will show the total number of tracks of the entire disc after reading.
3. To start playing the CD, press the
4. To pause CD playback, press the
5. Adjust the VOLUME Control to the desired volume level.
6. To stop playing the CD, press the STOP
Skip Mode
1. During play or pause mode, press the
2. During play or pause mode, press the
3. During play mode, press the
Programming the CD Player
The programming of the CD player should be done during STOP mode.
1. Press the PROG button, the LCD display will show ' 01 ' and "PROG" flash continuously.
2. Press the or
3. Press the PROG button again to store this track in memory, the LCD will show ' 02 ' and
flash continuously.
4. Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 20 tracks in
the memory.
5. Press the button to play the disc in the programmed order.
6. To stop playing, press the STOP
7. To cancel the programming list, press the STOP
FUNCTION switch to OFF position.
HEADPHONE
RADIO
CD MODE
button.
button again.
button twice will go back to the previous track.
buttons to select the desired track.
button.
RCD1180 / English Instruction Manual
button.
button to go to the next track.
button to go back to the beginning of the track.
button and open the CD door or set the
2