Smart Cover" Functions - Cressi DIGI 2 Manual De Instrucciones

"SMART COVER" FUNCTIONS

 WARNING!
Do not dive with the smart cover inserted into the
display housing! Removing it at depth would cause the instrument
to turn on belatedly, resulting in incorrect measurements of the
parameters for depth, maximum depth, range, and dive time!
The "smart cover" protects the instrument from accidental blows,
saves the battery when the device is not being used, allows you to
change units of measure, and lets you temporarily switch on the
display for a few minutes to check the battery power or to familiarize
yourself with the device before the dive.
 WARNING!
Do not take the smart cover on dives or get it wet.
P80-DIGI 2.indb 35
 WARNING!
Before diving, always check that the units of
measure have been set correctly. Incorrect settings could lead
to confusion and an incorrect interpretation of the information
provided, with possible serious harm to the health of the user.
 WARNING!
The smart cover is not an integral part of the
product, and must always be removed when connecting to the
first stage/cylinder regulator unit.
 WARNING!
Because it is temporary, switching on the
display using the smart cover does not allow for use of the DIGI
2 if it has not been correctly connected and activated (HOW TO
CONNECT THE DIGI 2 CONSOLE and HOW TO ACTIVATE THE DIGI 2
CONSOLE).
To protect the instrument from accidental blows and to reduce
battery consumption as much as possible, attach the smart cover as
shown in the illustration below, checking that it is oriented correctly
and pressing until it clicks in place.
EN
35
13/06/19 14:01