Changing Colored Protected Cover - Cressi DIGI 2 Manual De Instrucciones

CHANGING COLORED PROTECTED COVER

The DIGI 2 console is covered by a silicone shell that gives the
product its special look while also protecting it from accidental blows.
Users or an authorized center can replace the shell by following these
steps:
• Disconnect the device from the first stage/regulator group.
• Separate the shell from the body of the instrument, beginning
with the point shown.
• Pull gently outward, undocking the cover from the four perimeter
anchor points.
• At this point, slide the cover to be replaced over the hose.
• Slide on the new cover, taking care to insert all the stops in their
respective grooves.
• Reconnect the instrument as explained in chapter:
"HOW TO CONNECT THE DIGI 2 CONSOLE".
P80-DIGI 2.indb 37
EN
37
13/06/19 14:01