SEVERIN S2+ One Touch Instrucciones página 44

GB
fig. 2: Inserting the water filter
NOTE!
A water filter improves the water quality of the water
used by removing contaminants and scale from the
water. SEVERIN recommends the use of a water
filter for high water quality starting with 10 °dH.
8. Fill the water tank with cold drinking water up to the "Max" marking
and place it on the device (Fig. 3). Here, make sure that the water tank
hooks into the top of the device and lies close against the device.
9. Select with the e-Select
• , if you do not want to use a water filter or
no
• , if you want to insert a water filter in the water tank.
yeS
44
fig. 3: Insert water container
The display shows:
Â
rinSing
Water runs from the coffee-milk dispenser into the drip tray.
As soon as the rinsing procedure is complete, the display shows
the "Beverage selection" view. The device is now ready for opera-
tion.
Version 4 2014-11