Descaling - SEVERIN S2+ One Touch Instrucciones

3. Fill the water tank with water up to the max. marking and place it on the
device.
4. Press the e-Select to confirm.
The display shows:
Â
empty drip tray and groundS cont.
5. Remove the drip tray and empty it together with the grounds container.
6. Re-assemble all parts and push the drip tray back into the device.
7. Place a 500 ml container under the coffee-milk dispenser on the cup
tray.
8. Press the e-Select.
The display shows:
Â
cleaning
9. As soon as the command
pleaSe add cleaning taB
appears on the display, open the cover of the bean container, place the
cleaning tablet into the powder dosing chamber and turn the powder
dosing chamber.
NOTE!
The SEVERIN cleaning tablets are optimally at-
tuned to your device and can be purchased from
your SEVERIN dealer.
10. Turn the powder dosing chamber back to the initial position and close
the cover of the bean container.
11. Press the e-Select to continue.
The display shows:
Â
cleaning
Version 4 2014-11
NOTE!
The cleaning process can take as long as 15
minutes.
12. As soon as the command
pleaSe empty groundS container
appears on the display, repeat steps 5 and 6.
The cleaning program is complete as soon as the "Beverage
Â
selection" view is displayed again.

8.2.5 Descaling

Depending on the water hardness of the drinking water used and the ap-
plication of a water filter, the device must be descaled at particular intervals
so that no scale builds up in the system.
CAUTION!
Due to unsuitable descaler and if the descaling is
not performed regularly, the device can be dam-
aged.
– Use SEVERIN descaler, never vinegar or other
acidic substances.
– Descale regularly.
GB
59