Techno Line WS8013 Manual Del Usuario página 8

Part B:
B1: "MODE" button
B2: "SNOOZE" button
B3: "ALARM" button
B4: "+" button
Part C:
C1: Wall Mount Holes
C2: Stand
Getting Started:
Main Unit:
 Slide open battery compartment cover [C3]
Insert 4 x AA size batteries observing polarity ["+" and" –" marks].

 Replace battery compartment cover [C3]
Time and Alarm Setting
Radio Controlled Clock:
 After batteries inserted, the clock automatically starts to scan the DCF time signal. Radio
Control Icon" " flashes on the LCD.
flashes,
Indicating that receiving DCF
signal is now
 The clock automatically scans the time signal at 3.00 a.m. every day to maintain accurate
timing. If reception fails, scanning stops ("
Scan the time signal manually by holding "

attempt takes about 5 minutes.
Stop scanning by holding "

" " is displayed on the LCD if it is Daylight Saving Time

Manual Time Setting:
In time display mode, press the "MODE" button (B1) for 3 seconds to enter time setting

mode. 24 Hr is flashing on the display.
B5: "-/
B6: "RESET" button
C3: Battery Compartment
turns on static,
Indicating that signal
received successfully
" on LCD disappears)
" button (B5) for 3 seconds. Each reception
" button (B5) for 3 seconds.
EN02
" button
disappears,
Indicating that signal
reception failed