Assembling The Breast Pump; Using The Breast Pump - Philips AVENT SCF430 Manual Del Usuario

Assembling the breast pump

Make sure you have cleaned and disinfected the parts of the breast pump that
come into contact with milk.
Warning: Be careful, when you have disinfected the breast pump
parts by boiling them, they can be very hot. To prevent burns, only start
assembling the breast pump when disinfected parts have cooled down.
Check the breast pump kit parts for wear or damage before use and replace them
if necessary.
Note: Correct placement of the cushion and the silicone diaphragm is essential
for the breast pump to form a proper vacuum.
1 Insert the white valve into the pump body from underneath. Push the valve in as
far as possible (Fig. 2).
2 Screw the pump body clockwise onto the bottle (Fig. 3) or storage cup (Fig. 4)
until it is securely fixed.
Note: If you use a storage cup, you have to screw the adapter for cup onto
the storage cup first (Fig. 4).
3 Insert the stem in the silicone diaphragm (Fig. 5).
4 Insert the silicone diaphragm into the pump body from above. Make sure it fits
securely around the rim by pressing down with your fingers to ensure a perfect
seal (Fig. 6).
5 Attach the handle onto the diaphragm with stem by hooking the hole in the
handle over the end of the stem. Push down the handle onto the pump body
until it clicks into place (Fig. 7).
6 Place the cushion into the pump body (Fig. 8) and make sure that the rim covers
the pump body. Push in the inner part of the cushion into the funnel against the
line indicated with an arrow (Fig. 9).
Note: Place the cushion cover over the cushion to keep the breast pump clean
while you prepare for expressing.

Using the breast pump

Warning: Always use the breast pump with the cushion.
Note: Contact your healthcare professional in case of questions or if you
experience side effects.
9
English