Renishaw ACR2 Guia De Instalacion página 27

PHS D/E axis origin
NOTE: Angular orientation of D and E axes
required for port datum procedure (D and E 0°)
Manual No. H-1000-4045
D axis C/L
RD
RE
±0.1°
Figure 7 - ACR2 port datum procedure
2.
Position the ACR2 port in the lower latched position (Figure 8).
To manually move between upper and lower positions, the two port pins
must be pushed to the left to disengage the motion locks.
3.
Lift the lid retaining clip up to hold the latch in the open position (Figure
9).
E axis C/L
Typical probe assembly
for port datum procedure
NOTE
AUTOMATIC OPERATION
27