Safety Note - Renishaw ACR2 Guia De Instalacion

SAFETY
4
GB WARNINGS
Each ACR2 port contains spring-loaded components which cause pinch
hazards if covers are removed.
Do not dismantle ACR2 ports or remove them from their mounting plates.
Return defective units to an authorised Renishaw Customer Service Centre.
Pinch hazards exist between moving parts and between moving and static
parts. Do not hold any part of the Autochange system during movements or
during automatic probe changes.
Beware of unexpected movement. The user should remain outside of the full
working envelope of probe head / extension / probe combinations.
In all applications involving the use of machine tools or CMMs, eye protection
is recommended.
There are no user serviceable parts inside Renishaw ACR2 units. Return
defective units to an authorised Renishaw Customer Service Centre.
For instructions regarding the safe cleaning of Renishaw products, refer to
the MAINTENANCE section of the relevant product documentation.
Refer to the machine supplier's operating instructions.
It is the machine supplier's responsibility to ensure that the user is made
aware of any hazards involved in operation, including those mentioned in
Renishaw product documentation, and to ensure that adequate guards and
safety interlocks are provided.
Under certain circumstances the probe signal may falsely indicate a probe
seated condition. Do not rely on probe signals to stop machine movement.
The expected method of providing an emergency stop for Renishaw products
is to remove power.

SAFETY NOTE

Manual No. H-1000-4045