Adjust The Print Alignment And Color Density; Check The Ribbon Remaining - Rimage Professional 3400 Guia Del Usuario

Set Your Printing Preferences on a Windows PC
c. To modify only Standard Area settings, select the Standard radio
button.
i. Enter the desired Outer Diameter.
ii. Enter the desired Inner Diameter.
d. To print on a disc with a stacking ring, select the Advanced radio
button. The Hub Area settings display.
i. Enter the desired Outer Diameter for the hub.
ii. Enter the desired Inner Diameter for the hub.
e. Select OK to save the changes. The Printable Area Settings window
closes.
4. When you have made the desired choices in the Rimage Everest 400
Printing Preferences window, select Apply.
5. Select OK to close the Rimage Everest 400 Printing Preferences window.

Adjust the Print Alignment and Color Density

Access printing preferences. Refer to page 13 for instructions.
1.
2. Select the Utility tab.
3. Select Status Monitor... button. The Rimage Everest 400 Status Monitor
window opens with the Status tab active.
Tip: On the Status tab, you can view the progress of a print job, the type
of print ribbon installed, and the estimated percentages of unused
ribbon for the print and retransfer ribbons.
4. Select the Printer Information tab to view or change the Print Alignment
and Color Density settings, or view the Everest 400 Printer Status.
Tip: The Printer Information tab also displays the current firmware
version and serial number of your Everest 400 printer.
a. View or change the Print Alignment Settings.
i. From the Print Alignment Settings pane, select the Modify
button. The Print Alignment Settings dialog opens.
2001431_C
5. Select Close to close the Status Monitor dialog box.
6. Select OK to close the Rimage Everest 400 Printing Preferences window.

Check the Ribbon Remaining

The operator panel on the front of the 3400 and 5400N displays the
estimated number of prints remaining on the print ribbon and the retransfer
ribbon.
For more information visit rimage.com/support
ii. Select the desired Color/Monochrome setting to modify the
horizontal alignment for all ribbon types.
iii. Select the desired Color setting to modify the vertical alignment
for prints with a CMY ribbon.
iv. Select the desired Monochrome setting to modify the vertical
alignment for prints with a monochrome ribbon.
v. Select OK to save the changes. The Print Alignment Settings
window closes.
b. View or change the Color Density Settings.
i. From the Color Density Settings pane, select the Modify button.
The Color Density Settings dialog opens.
ii. Select the desired Cyan, Magenta and Yellow settings to modify
the color density.
iii. Select the desired Black setting to modify the density for
monochrome images.
iv. Select OK to save your changes. The Color Density Settings
window closes.
15