Introduction; Important - Rimage Professional 3400 Guia Del Usuario

Introduction

This manual provides the information needed to configure, operate, and
maintain the Rimage Professional™ 3400 and 5400N systems. The terms
'system' and 'autoloader' may be used throughout this manual to refer to
both the 3400 and the 5400N; any differences between the 3400 and 5400N
are noted. The term 'printer' is use to refer to the integrated Everest 400
printer.
For technical information, refer to the Rimage Professional 3400 and 5400N
Specification document found at www.rimage.com/support. From the
Support page select: Professional Series > Product Name > User Manuals
tab.
Important! Your Rimage Professional 3400 or 5400N system may not look
exactly like the model featured in this user guide.
About this User Guide
• While we try to maintain all versions of our manuals and
documentations, please note that the English version found on our web
site always contains the most up-to-date information.
• Unless otherwise indicated, all Windows navigation statements are
Windows 7 paths. Other Windows operating system navigation may
differ slightly.
• These notes and symbols are used throughout the manual to help clarify
information:
Tip: A Tip suggests alternative methods that may not be obvious and helps
you understand the benefits and capabilities of the product.

Important!

An Important note provides information essential to the completion of a
•
task.
Important supplemental information.
•
You can disregard information in a Tip and still complete a task, but do
•
not disregard an Important note.
2001431_C
n
n
About the Professional 3400 and 5400N
The 3400 and 5400N are part of the Rimage Professional series of products.
The 3400 system consists of the 3400 autoloader and an integrated
Everest 400 printer. The 5400N systems consists of the 5400N autoloader,
an integrated Everest 400 printer, and an embedded control center (PC).
Information about the integrated Everest 400 printer is included in this user
guide.
An external PC must be used with the non-embedded 3400 system. The
external PC does not ship with a non-embedded system; you must provide a
PC to be used as the external control center. Refer the Rimage Professional
3400 and 5400N Specification document found at
for the minimum PC requirements for the 3400.
The embedded PC in the 5400N is a network-ready device that receives
orders from other networked computers. You can also operate the
autoloader remotely by using Microsoft Remote Desktop Connection or
Rimage WebRSM or locally by attaching a monitor, keyboard, and mouse.
For information about setting up and submitting orders from a networked
PC, refer to the Rimage Advanced Setup (Networking) Guide available at
www.rimage.com/support.
For more information visit rimage.com/support
Caution: A Caution indicates that failure to observe this guideline could
result in loss or damage to the equipment, product, software, or data.
Warning! A Warning indicates that failure to follow this guideline
could result in bodily injury to personnel operating or maintaining the
equipment.
www.rimage.com/support
1