Haier HMV1640 Instrucciones De Instalación página 23

c
b
9. Secure the blower unit to the microwave with the blower motor screw removed
in Step 1. Completely tighten the screw.
10. Replace the blower plate and fasten with the blower plate screw removed in Step
1. Completely tighten the screw.
11. Slide the exhaust adapter down into the guides at the top center of the back of
the oven.
12. Push in firmly until the exhaust adapter is engaged in the locking tabs.
NOTE: Ensure the damper is installed so that the hinge is at the top and the
damper swings easily.
a
f
MOUNT THE MICROWAVE OVEN
Use two or more people to move and install microwave oven.
Failure to do so can result in back or other injury.
IMPORTANT:
•
Do not grip or use door handle during installation.
•
If the cabinet front hangs below the cabinet bottom shelf, it is recommended
that you use filler blocks to avoid damaging the case by overtightening the
screws.
a
a
b
c
b
c
d
e
WARNING
Excessive Weight Hazard
a
End A
b
End B
c
AFTER: Fan Blade
Openings Facing Back
a
Blower Plate
b
Back of Microwave
c
Blower Motor Screw
a
Adaptor
b
Damper
c
Back of Microwave
d
Guide
e
Locking Tabs
f
Guide
21