Berner BHD-4-32 Manual De Instrucciones página 5

HEAVYDUTY ROTARY HAMMER
BHD432
Congratulations!
You have chosen a BERNER tool. Years of experience, thorough
product development and innovation make BERNER one of the
most reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
Power Input
Frequency
No load speed
No load beat per minutes
Single impact energy (EPTA 05/2009)
Hammerdrilling
Chiselling
Maximum drilling range in steel/wood/concrete
Chisel positions
Core drilling capacity in soft brick
Tool holder
Collar diameter
Weight
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into metal
Vibration emission value a =
h
Uncertainty K =
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiseling
Vibration emission value a
h, Cheq
Uncertainty K =
Screwdriving without impact
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
BHD-4-32
V
AC
V
AC
W
Hz
-1
min
bpm
J
J
mm 13 / 32 / 32
mm
mm
kg
dB(A)
dB(A)
dB(A)
2
m/s
2
m/s
2
= m/s
2
m/s
2
= m/s
2
m/s
2
m/s
2
m/s
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
230
off or when it is running but not actually doing the job.
230/115
This may significantly reduce the exposure level over the
total working period.
2
Identify additional safety measures to protect the operator
1000
from the effects of vibration such as: maintain the tool
50
and the accessories, keep the hands warm, organisation
0 – 820
of work patterns.
0 – 4700
EC-Declaration of Conformity
Machinery Directive
4.2
4.2
12
Heavy-Duty Rotary Hammer
100
BHD-4-32
SDS Plus
BERNER declares that these products described under Technical
60
Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
4.2
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact BERNER at
the following address or refer to the back of the manual.
86
The undersigned is responsible for compilation of the technical
3
file and makes this declaration on behalf of BERNER.
97
<2.5
1.5
i.V. Bert Habets
Senior Director Continuous Improvements
BERNER Trading Holding GmbH
8.2
Bernerstraße 6, 74653 Künzelsau, Germany
1.5
01.04.2018
WARNING: To reduce the risk of injury, read the
7.1
instruction manual.
1.5
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
<2.5
signal word. Please read the manual and pay attention to
1.5
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
5