Description Of Functions - Tintometer Lovibond SD 315 Oxi Instrucciones

4.3.2 Description of functions

Menu Parameter
Start the logger
(Return to opera-
ting mode)
Stop the logger
(Return to opera-
ting mode)
Read manually stored measurement data
Record = St. X
Deletion of the data logger
CLr no
CLr ALL
CLr LASt
Read calibration data
Calibration data =
C.d. X
(*) <LoGG run>, <LoGG StoP> appear only if the cyclical logger is being used (Func = Cycl)
(**) <rEAd loGG> appears only if the individual value logger is being used (Func = Stor)
With 1- and 2-point calibration, SL.1 = SL.2
With 3-point calibration, independent values are determined for SL.1 and SL.2
46
Values Meaning
Read up to 1,000 records (X = 1 to 1,000)
O concen- Display ppm or mg/litre
2
tration
O saturation Display % O
2
Temperature Display °C or °F
A b s o l u t e Display in hPa
pressure
L ID Display of the measuring point
Date Display day/month and time
Cancel delete
Delete the entire memory
Delete the last record saved
Selection of up to 16 sets of calibration data
(X = 0 to 15)
ELEC Sensor evaluation in %
SL. 1 Display at 0% O
SL. 2 Slope 0% O
Date Display day/month and time
2
2
– air
2
SD_315_DO_1 06/2020
*
*
**
1)
1)