ROMPA 18549 Manual De Instrucciones página 7

15. Troubleshooting
In the unlikely event of product failure, please check the following:
Problem: No light
• Check that the 3-pin plug which is connected to the metal chassis that houses the LEDs is
connected to the power out socket on the power supply. The power supply has an ON/OFF
switch – this needs to be turned on, as well as the mains switch.
Problem: Lights sometimes changes colour randomly
• The lights may be picking up Wi Fi signals from somebody nearby who has a Colour
Changing Panel, or 8 Colour Wirefree Controller etc (or a Sensory Magic room) etc.
Problem: Wi Fi signals from 2 different nearby rooms are interfering with each other.
• If you have 2 neighbouring rooms each using Wi Fi products, then the devices in both
rooms can be controlled by any nearby Wi Fi controllers. An "All-In-One" Controller would
be required to alter the wireless settings to operate without interfering with one another.
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
producthelp@rompa.com
VIBRO TUB 18549-18550, February 2017,
Copyright ROMPA® Ltd