Installing Windows - ASROCK P67 Pro3 SE Manual De Instrucciones

2.10 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.11

Installing Windows

64-bit With RAID Functions
If you want to install Windows
/ SATAII / SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
RAID mode is not supported under Windows
2.12 Installing Windows
/ XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.12.1 Installing Windows
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
Using SATA / SATAII / SATA3 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE] for SATA2 ports.
Set the option "SATA3 Mode" to [IDE] for SATA3 ports.
STEP 2: Install Windows
30
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit OS on your SATA / SATAII / SATA3
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock P67 Pro3 SE Motherboard
TM TM
/ Vista
TM TM
/ Vista 64-bit on your SATA
®
XP / XP 64-bit OS.
TM TM
/ Vista 64-bit / XP
TM TM
/ Vista 64-bit / XP / XP 64-
®
XP / XP 64-bit OS.
SATA Confi guration.