Kohler K–15708 Guia De Instalacion página 6

Brass
Washer
Rough
Deck
2. Install the Spout Supply Tube
NOTE: Leave the protective sleeve on the spout supply tube until
the spout installation.
Slide the brass washer from the bottom of the spout supply tube
over the threads until the washer reaches the supply tube
shoulder.
Insert the spout supply tube through the mounting hole from the
top of the deck/bath rim.
The flat portion of the brass washer should face forward, and the
countersunk holes should face up. The spout supply tube will be
suspended by the brass washer.
Slide a brass washer onto the spout supply tube from underneath
the deck/rim and thread on the mounting nut.
Tighten the nut.
Secure the plate to the rough deck with two wood screws.
For all installations other than rim mount, secure the top brass
washer to the deck using two wood screws.
For rim mount installations using additional plywood, secure the
bottom brass washer with wood screws.
114183-2-CB
Spout Supply
Tube
Screw
Screw
Brass
Washer
Supply
Nut
Tube
Shoulder
6 Kohler Co.