Steam Ironing; Shot Of Steam; Dry Ironing - Russell Hobbs Colour Control Supreme 25400-56 Manual Del Usuario

Temperature light colour
Yellow
Blue
Purple
Green
Red
5. The temperature light will flash while the iron is heating up, then come on continuously when the set
temperature is reached.
REDUCING TEMPERATURE
This takes a bit longer, as the iron has to lose the heat it has built up, so be patient. It's best to organise
your ironing so that you don't need to reduce the temperature.

STEAM IRONING

1. When steam ironing, you must set the temperature to ••• (green) or max (red).
2. Set the steam control to the setting you want, n = no steam,
3. Wait till the temperature light stops flashing, then start ironing.
SPRAY
Water spotting affects some fabrics. Test this out on a hidden part of the fabric.
1. Lift the iron off the fabric.
2. Aim the spray nozzle at the fabric.
3. Press the Sbutton – you may have to press it 2 or 3 times to pump water through the system.

SHOT OF STEAM

This works with dry or steam ironing, as long as there's water in the reservoir, and the temperature is set to
••• (green) or max (red).
1. Check that the temperature is set to ••• (green) or max (red).
2. Lift the iron off the fabric.
3. Press the P button.
4. Leave 4 seconds between shots, to let the temperature build up.

DRY IRONING

If you're going to be dry ironing for 20 minutes or more, empty the reservoir first, to avoid spontaneous
bursts of steam.
1. Set the steam control to n .
2. Select the required temperature.
3. Wait till the temperature light stops flashing, then start ironing.
Temperature setting
Standby mode
w
= high steam.
5
•
••
•••
Max
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE