Kohler K-702210 Guia De Instalacion página 10

Install the Door (cont.)
If needed, with the door closed, readjust the door and side panel from the outside of the shower to
ensure the gap between the door and side panel/strike jamb is constant and the magnets line up.
Make sure the gaps appear consistent.
Once the door and side panel are in the proper installation position, drill the remaining holes and
secure the door to the expander jamb using four additional #8 x 5/8" screws. Install the screws in
the bottom five positions. The top hole will be left open at this point.
1015287-2-B 10 Kohler Co.