Publicidad
Idiomas disponibles
Idiomas disponibles
3
2
4
8
7
6
5
5
12
14
13
15
16
- Position the racks (1) and (2) and mount using the M8x70 countersunk
screw (3).
NOTE:
1
Tighten only lightly at first to make it possible to align the fixing plate (4)
later.
NOTE:
Both the original top case plate and the optional PP top case rack 60112927000
can be mounted. If the PP top case rack is mounted, the ø20x8.4x9 spacer
must be mounted instead of the form washer (7) and the ø20x8.4x13 spacer
must be mounted instead of the form part (10).
NOTE:
Grease the M8x80 countersunk screw (5) (included) with copper paste.
Note the curvature of the form part (10) and form washer (7).
10
- Premount the cross connector 1 (6) (included) on the top case plate (8)
using the M8x80 countersunk screws (5) and the form washer (7) (inclu-
ded).
- Insert the form part (10) (included).
NOTE:
Grease the M8x60 countersunk screw (11) (included) with copper paste.
- Mount the top case plate using the M8x80 (5) (included) and M8x60 (11)
countersunk screws.
11
- Mount the short fixing plate (12) (included) on the left passenger footrest
using the M8x20 allen head screws (13) (included) and the A8.4 washers
(14) (included).
- Mount the long fixing plate (included) on the right passenger footrest using
the M8x20 allen head screws (included) and the A8.4 washers (included).
- Mount the cross connector 2 (15) (included) using the M6x20 hex screws
(16) (included), A6.4 washers (included) and M6 hexagon nuts (included).
NOTE:
If a license plate holder is mounted, it is screwed on together with cross con-
nector 2.
7
Publicidad
