Safety Check List - Plidco Split+Sleeve Instrucciones De Instalación

IMPROPER SELECTION OR USE OF THIS PRODUCT CAN RESULT IN
EXPLOSION, FIRE, DEATH, PERSONAL INJURY, PROPERTY DAMAGE
AND/OR HARM TO THE ENVIRONMENT.
Do not install a PLIDCO Split+ Sleeve with a sling closure assembly until all aspects of the application
are thoroughly analyzed. Do not use a sling closure assembly until you read and understand these
installation instructions. If you have any questions, or encounter any difficulties using this product,
please contact PLIDCO.
The person in charge of the repair must be familiar with these instructions and communicate them to all
personnel involved in the repair crew.
Pipeline repairs can be made with the pipeline in operation or shutdown.

Whenever a PLIDCO product is modified in any form, by anyone other than the Engineering and
Manufacturing Departments of The Pipe Line Development Company, the product warranty is
voided. Products that are field modified do not have the benefit of the material traceability,
procedural documentation, quality inspection, and experienced workmanship that are employed
by The Pipe Line Development Company.

Read and follow these instructions carefully. Follow your company's safety policy and applicable
codes and standards.

The Sling Closure Assembly Installation Procedure is supplemental to the PLIDCO Split+Sleeve
Installation Instructions.
Instructions must be followed.

The Sling Closure Assembly Test Report must be included with this procedure. Important
information pertaining to factory pre-set dimensions is listed on the Sling Closure Assembly Test
Report. Contact PLIDCO if the test report was not included.

When repairing an active leak, extreme care must be taken to guard personnel. Severe injury or
death could result.
The Pipe Line Development Company
11792 Alameda Drive • Strongsville, Ohio 44149
Phone: (440) 871-5700 • Fax: (440) 871-9577
Toll Free: 1-800-848-3333
web: www.plidco.com • e-mail:
SLING CLOSURE ASSEMBLY
INSTALLATION INSTRUCTIONS
!! WARNING!!
READ CAREFULLY

Safety Check List

All procedures listed in the PLIDCO Split+Sleeve Installation
pipeline@plidco.com
Page 1 of 5
IP-017
Revision 1